Calibre

Seiko VK63

Meca-quartz

Seiko · 2010s – present

Open the interactive schematic

Overview

Two quartz-controlled stepping motors divide the work: one drives the ordinary time display and the other drives the chronograph. Switch springs and operating levers coordinate the chronograph coupling and hammer reset. The centre hand counts fifths of a second; a sixty-minute counter sits at nine, running small seconds at six, and a continuous 24-hour hand at three. The mechanical return-to-zero is the feature behind the meca-quartz name.

Represented revision: TMI VK63A

Recorded specifications

Type
Quartz chronograph with mechanical reset
Oscillator
32,768 Hz quartz crystal
Jewels
0
Chronograph
Centre 1/5-second hand and 60-minute counter
Display
Hours/minutes, small seconds, 24-hour hand, date
Diameter
30.8 mm outside; 29.0 mm casing
Height
5.10 mm
Maker
Seiko Instruments (TMI)
Reset
Mechanical hammer return to zero; circuit reset is separate

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library