Tudor MT5602
In-house, and it shows
Tudor · 2015 – present
Overview
Tudor spent most of its life fitting ETA movements and being the sensible sibling. The MT series ended that. Seventy hours of reserve, COSC certification as standard, a silicon balance spring and a traversing balance bridge fixed at both ends rather than a cantilevered cock — the same reasoning Rolex applies one floor up, arrived at independently and at a fraction of the price.
Represented revision: MT5602 in the 2016 Heritage Black Bay, original COSC execution
Recorded specifications
- Height
- 6.5 mm
- Jewels
- 25
- Frequency
- 28,800 vph (4 Hz)
- Power reserve
- ≈ 70 hours
- Diameter
- 31.8 mm
- Balance
- Free-sprung, variable inertia
- Balance spring
- Silicon
- Bridge
- Traversing, fixed at both ends
- Certification
- COSC as standard
Models and relatives
- Tudor Black Bay 41, Ranger, Pelagos 39
- the MT5612 is the same movement with a date
- built by Kenissi, which also supplies Breitling and others
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Tudor Heritage Black Bay 2016 factory press kit
Scope: No-date central hours/minutes/seconds; bidirectional rotor; silicon spring; 28,800 vph; 25 jewels; 31.8 mm diameter; 6.5 mm height; approximately 70 hours. The drawing remains schematic; other claims are not established by this reference.
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.