Calibre

Vulcain Cricket

The wristwatch you can hear

Vulcain · 1947 – present

Open the interactive schematic

Overview

The first wristwatch alarm loud enough to actually wake somebody, and it took Vulcain years to work out why earlier attempts had failed. The answer was not the mechanism but the case: a hammer beating on a pin against a second inner case back, with a resonating chamber between the two. The movement has a separate alarm mainspring. One crown winds the two barrels in opposite directions; a button selects alarm setting. Sounding the alarm therefore does not use the going-train spring. Gifts to several US presidents helped establish its presidential nickname.

Represented revision: Manual Cricket V10-style controls; alarm work grouped schematically

Recorded specifications

Jewels
25 (current V10/V11 manufacture calibre)
Frequency
18,000 vph (2.5 Hz)
Power reserve
≈ 52 hours going, alarm wound separately
Diameter
≈ 30.0 mm (approximate)
Winding
Manual, one crown; opposite directions wind the two barrels
Complication
Alarm on a separate barrel
Sound
Hammer on a pin, resonating between two case backs
Alarm duration
20–25 seconds on a full wind

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library