Jaeger-LeCoultre 920
The movement that made the Royal Oak possible
Jaeger-LeCoultre · 1967 – present
Overview
The LeCoultre 920 / Audemars Piguet 2120 architecture has a central rotor supported at its outer edge by ruby rollers running on a circular rail. This supports a wide winding weight while limiting the load on its central pivot. It is not a peripheral-only rotor or a ball-bearing race. The original time-only 2120 is 2.45 mm thick and has no seconds hand. The date-equipped 2121 is thicker. This schematic follows the time-only architecture; details of other branded derivatives require their own references.
Represented revision: LC920/AP2120 time-only architecture, as documented by AP archive
Recorded specifications
- Display
- Hours and minutes only
- Jewels
- 36
- Frequency
- 19,800 vph (2.75 Hz)
- Power reserve
- ≈ 40 hours
- Diameter
- 28.0 mm (AP 2120 reference)
- Height
- 2.45 mm
- Winding
- Bidirectional, central rotor supported by ruby rollers
- Note
- Supplied to AP, Patek and Vacheron, never used by JLC itself
Models and relatives
- LeCoultre 920 / Audemars Piguet 2120 time-only architecture
- AP 2121, Patek 28-255 C and Vacheron derivatives differ
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- AP Chronicles: calibres 2120–2121
Scope: 1967 delivery; 28 mm diameter; 2.45 mm thickness; 19,800 vph; bidirectional central rotor supported by ruby rollers; no seconds hand. The drawing remains schematic; other claims are not established by this reference.
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.