Miyota 9015
What the 8215 is missing
Miyota · 2009 – present
Overview
A thinner, faster-beating companion to the long-running 8215. It hacks. It winds in one direction on a ball-bearing rotor and can freewheel in the other. It beats at 28,800 rather than 21,600, giving eight hand advances per second instead of six. At 3.9 mm it is nearly two millimetres thinner than the 8215, which is why many slim microbrand watches are built around it. Its combined barrel and train bridge carries separate automatic and manual winding guards underneath. The factory chart identifies one reversing wheel, four distinct reduction wheels and two ratchet sliding wheels. This illustration separates those components and the 9015-specific calendar/setting work. Its outlines, positions, gear teeth and depths remain approximate; the catalogue reconciliation records the remaining gaps.
Represented revision: Miyota 9015; factory two-sheet assembly chart and 72-row parts list inspected 17 November 2026; 108-L3XX date variant unspecified
Recorded specifications
- Maker
- Miyota (Citizen)
- Jewels
- 24
- Frequency
- 28,800 vph (4 Hz)
- Power reserve
- ≈ 42 hours
- Diameter
- 26.0 mm
- Height
- 3.90 mm
- Winding
- Unidirectional, ball-bearing rotor
- Hacking
- Yes
- Hand-winding
- Yes
- Shock protection
- Parashock
- Accuracy
- −10 / +30 seconds per day
Models and relatives
- a very large share of microbrands — Christopher Ward (early), Halios, Monta (early), Farer
- many slim dress watches under £1000
- the no-date 9039 has the same 3.90 mm movement height, with lower hand heights
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Miyota 9015 factory parts list
Scope: All 72 catalogue rows reconciled in the local audit register; references, explicit screw quantities, alternative bridge/stem and optional clamps. Text catalogue, not a dimensioned diagram.
- Miyota 9015 factory assembly/disassembly chart — sheet 1
Scope: Visually inspected original full-size sheet: combined barrel/train bridge, distinct underside guards, reduction-wheel layering, centre-wheel bridge, assembled balance/bridge and movement-side brake. New SVG positions/outlines are approximate.
- Miyota 9015 factory assembly/disassembly chart — sheet 2
Scope: Visually inspected original full-size sheet: five-screw hour-wheel guard, single sprung date jumper, calendar correction wheels, washer, setting spring/cover, operating lever, long yoke and lower shock-setting parts. No fitted dimensions supplied.
- Miyota 9015 manufacturer specification
Scope: 24 jewels, 4 Hz, 3.90 mm, approximately 42 hours, stop seconds and −10/+30 seconds per day
- Miyota 9015 factory specification and winding-direction sheet
Scope: Both pages visually inspected: 26.00 mm diameter, 51-degree lift angle, one indicated rotor winding direction for 90/91/6T; dial spacer/dial screws, and plastic holder exchangeable with casing clamps. Holder number differs in presentation from the parts catalogue.
- Miyota 9039 factory specification
Scope: No-date comparison: same 3.90 mm movement height with lower hand fitting
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.