Seiko 7S26
The SKX engine
Seiko · Introduced 1996; C-series documentation 2011
Overview
The movement inside the SKX007 and a generation of Seiko 5s, and the most deliberately stripped-back mechanical calibre here. It does not hack. It does not hand-wind — wrist motion supplies its power. Its index-regulated balance does have a regulator: Seiko’s technical guide explains its adjustment. Magic Lever winding and Diashock are part of this deliberately economical architecture. The C-series revision is the reference for the specifications here; the diagram groups components rather than reproducing a factory dismantling sequence.
Represented revision: Seiko 7S26C
Recorded specifications
- Jewels
- 21
- Frequency
- 21,600 vph (3 Hz)
- Power reserve
- ≈ 41 hours
- Diameter
- 27.4 mm
- Height
- 4.90 mm
- Winding
- Bidirectional, Magic Lever
- Hacking
- No
- Hand-winding
- No
- Calendar
- Day and date
- Shock protection
- Diashock
- Regulator
- ETACHRON (7S26C)
Models and relatives
- Seiko SKX007 / SKX009 / SKX013
- Seiko 5 SNK and SNZF series
- Seiko Monster (first generation)
- 7S36 is a related 23-jewel version; 4R36 / NH36 add hand winding and hacking
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Seiko 7S26C/7S36C factory guide
Scope: C-series dimensions, 21 jewels, 41-hour reserve, no manual winding, regulator and component names
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.