Calibre

Ronda 715

Swiss made, at a price

Ronda · 1980s – present

Open the interactive schematic

Overview

Ronda is the independent that stayed independent, and the 700 series is why a small brand can put "Swiss Made" on a dial without buying from the Swatch Group. Simpler and cheaper than the ETA — fewer jewels, a plainer circuit block, and a conventional date display. If you have ever bought an inexpensive Swiss quartz watch, the odds are good that this or one of its siblings is inside it.

Represented revision: Ronda 715; current normtech Swiss Made/Swiss Parts specification

Recorded specifications

Type
Analogue quartz, stepper motor
Oscillator
32,768 Hz quartz crystal
Jewels
5 (Swiss Made version; 1 on Swiss Parts)
Display
3 hands and date
Battery
No. 371: 60 months / No. 395: 78 months
Accuracy
−10 / +20 seconds per month (instantaneous rate)
Maker
Ronda AG, Lausen — independent
Diameter
26.0 mm outside; 25.6 mm casing
Height
2.50 mm movement; battery height varies
Note
Swiss Made and Swiss Parts jewel counts differ

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library