Seiko 6R35
Seventy hours, mid-tier
Seiko · 2019 – present
Overview
The 6R35 extends Seiko’s familiar 3 Hz architecture to an approximately seventy-hour reserve. It adds hacking and hand-winding to the functions of a 7S26, while both calibres use index regulation. Its factory guide identifies changes to the barrel, balance and escapement relative to the 6R15; it does not specify a thinner-wall construction. Magic Lever winding remains, as used in the Alpinist SPB121 and Prospex SPB143 family.
Represented revision: Seiko 6R35A
Recorded specifications
- Jewels
- 24
- Frequency
- 21,600 vph (3 Hz)
- Power reserve
- ≈ 70 hours
- Diameter
- 27.4 mm
- Height
- 5.25 mm
- Mainspring
- Long-reserve barrel assembly; construction not specified here
- Winding
- Bidirectional, Magic Lever
- Hacking
- Yes
- Hand-winding
- Yes
- Accuracy
- −15 / +25 s per day specified
- Regulator
- ETACHRON (6R35A)
Models and relatives
- Seiko Alpinist SPB121
- Seiko Prospex divers (SPB143 and family)
- Seiko Presage models specifying calibre 6R35
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Seiko 6R35 operating specifications
Scope: 70-hour reserve, 24 jewels, 3 Hz and +25/-15 seconds/day
- Seiko 6R35A factory technical guide (reproduction)
Scope: 5.25 mm height and changed barrel/balance/escapement parts; exact barrel construction not specified
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.