Seiko 6139
One of the first automatic chronographs
Seiko · 1969 – 1979
Overview
Nineteen sixty-nine was the year three groups raced to the first automatic chronograph: Zenith with the El Primero, a Swiss consortium with the Chronomatic, and Seiko on its own with this. What is remarkable is the specification — a column wheel and a vertical clutch, the same combination Rolex would choose for the Daytona thirty years later, in a mass-market watch in 1969. This illustration fixes the 21-jewel 6139A execution in the factory sheet; other jewel counts and later 6139B parts differ. Its fourth wheel is part of the central chronograph-wheel and clutch assembly: the fourth wheel keeps rotating when the chronograph axle is stopped.
Represented revision: Seiko 6139A, 21-jewel execution in the factory parts sheet; 17-jewel A and later B variants also exist
Recorded specifications
- Jewels
- 21
- Frequency
- 21,600 vph (3 Hz)
- Power reserve
- ≈ 45 hours
- Diameter
- 27.00 mm casing (6139A)
- Control
- Column wheel
- Clutch
- Vertical
- Winding
- Bidirectional, Magic Lever
- Counters
- 30-minute (single register)
- Running seconds
- None — the centre hand belongs to the chronograph
- Calendar
- Day and date
- Note
- No hacking; no hand-winding
- Height
- 6.65 mm maximum (6139A)
Models and relatives
- Seiko 5 Sports Speedtimer 6139 family
- Exact case and movement revision must be checked together
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Seiko 6139A factory parts sheet and repair material
Scope: Factory 6139A sheets visually checked: 17/21-jewel executions, 27.00-mm casing diameter, 6.65-mm maximum height, 21,600 vph, day/date and fifth-second/30-minute recorder. Printed 6139A-4 Fig. 6 and -5 Fig. 10 place the fourth wheel inside the central chronograph-wheel/clutch assembly; -4/-6 show the movement-side minute-recorder drive. Not later B revisions or surveyed geometry
- Seiko 100 Stories — 1969 Speedtimer
Scope: Manufacturer history identifies 6139 column-wheel control and vertical clutch in the 1969 Speedtimer; not exact case examples or parts geometry
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.