Calibre

Rolex Calibre 4130

The Daytona chronograph

Rolex · 2000 – 2023

Open the interactive schematic

Overview

Rolex's in-house automatic Daytona chronograph uses column-wheel control and an axial clutch. The 2000 guide specifies about 72 hours reserve with the chronograph disengaged and 65 hours engaged. Both counter drives are represented with the chronograph work; a generic dial-side hour-counter drive is not part of this execution. The clutch is a non-dismantlable unit.

Represented revision: 4130; May 2000 factory technical information, later Parachrom history distinguished

Recorded specifications

Jewels
44
Frequency
28,800 vph (4 Hz)
Power reserve
≈ 72 hours disengaged /65 hours chronograph engaged (2000 guide)
Diameter
30.50 mm
Case-fitting diameter
30.00 mm
Height
6.50 mm
Clutch
Vertical, friction-disc
Control
Column wheel
Counters
30-minute, 12-hour, small seconds
Hairspring
Parachrom from 2000; blue surface treatment from 2005

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library