Calibre

Seiko 4006 Bell-Matic

It winds itself, and then it rings

Seiko · 1966 – 1978

Open the interactive schematic

Overview

Seiko’s Bell-Matic 4006 combines an automatic going train with a separately wound alarm barrel. The rotor winds the timekeeping barrel through Magic Lever winding; the crown winds the alarm spring. The alarm also requires its own setting and release mechanism. These functions are shown as grouped assemblies, with day/date indications on the dial side. The illustration is not a cross-section of a particular Bell-Matic case or an alarm-service guide.

Represented revision: 4006A27-jewel Bell-Matic from originalSeikoservice sheet

Recorded specifications

Height
7.15 mm (maximum)
Jewels
27 (selected 4006A parts-sheet execution)
Frequency
19,800 vph (2.75 Hz)
Power reserve
≈ 40 hours
Diameter
31.20 mm (casing diameter)
Winding
Automatic, Magic Lever
Alarm
Separate mainspring, hammer and sounding spring
Calendar
Day and date
Note
The rotor winds the going barrel; the crown winds the alarm

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library