Felsa 4000
A later rocking-changer automatic
Felsa · Mid-century; exact production period unresolved
Overview
The 4000 is a later Felsa automatic, and must not be identified as the original 1942 Bidynator. A documented surviving specimen uses a rocking changer for bidirectional winding and a separate centre-seconds pinion. The contemporary Marshall repair entry names wig-wag pinions and their spring variants. This no-date illustration groups those functions; 4000N and calendar derivatives require separate revision identification.
Represented revision: Felsa 4000 no-date, original rocking-changer family; not the original Bidynator or later 4000N
Recorded specifications
- Jewels
- Varies by execution; 35 in cited archive specimen
- Frequency
- 18,000 vph (2.5 Hz)
- Power reserve
- Not established for represented execution
- Diameter
- 11½ ligne; exact overall/casing dimensions unresolved
- Winding
- Automatic, bidirectional
- Display
- Centre seconds through separate pinion
- Mechanism
- Rocking changer / wig-wag pinion assembly
- Calendar
- None on represented 4000
Models and relatives
- Felsa 4000 no-date automatic ébauche
- 4000N and calendar members are separate revisions
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Christoph Lorenz movement archive — directly examined Felsa 4000 specimen
Scope: Primary specimen observations: bidirectional rocking changer, separate indirectly driven seconds pinion, double third wheel and no date; specimen-specific jewelling, not a factory guarantee for every execution
- Marshall Handy Manual — original trade repair entry (reproduction)
Scope: AC30 indexed original repair excerpt: 4000 wig-wag pinions 1500/1500-1 and spring/bridge revisions; full scan not visually verified in this research session
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.