Calibre

Zenith El Primero 400

The conventional El Primero chronograph

Zenith · El Primero family from 1969; later calibre 400 execution

Open the interactive schematic

Overview

The El Primero family began in 1969 with a high-frequency integrated automatic chronograph. The later calibre 400 represented here retains 36,000 vibrations per hour, column-wheel control, a 30-minute register, a 12-hour register, subsidiary seconds and date. Zenith’s conventional 50-hour execution is selected. The family’s introduction date does not date every 400 revision, and the drawing does not establish wear rates, exact train geometry or service procedures.

Represented revision: El Primero400, conventional50-hour date/chronograph execution; 1969 denotes family origin

Recorded specifications

Components
≈ 278
Jewels
31
Frequency
36,000 vph (5 Hz)
Power reserve
≈ 50 hours
Diameter
30.0 mm (13¼ ligne)
Control
Column wheel
Clutch
Lateral (horizontal)
Winding
Bidirectional
Counters
30-minute, 12-hour, small seconds
Resolution
1/10 second

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library