Calibre

Omega Calibre 321

The Moonwatch original

Omega · 1946 – 1968, reissued 2019

Open the interactive schematic

Overview

The chronograph that went to the Moon, and the first thing in this set with no automatic winding at all — there is no rotor, no reversing wheels, nothing above the bridges. Its column wheel controls a lateral coupling clutch. The runner and minute recorder occupy the bridge side; a separate hour-recording mechanism is fitted on the dial side. This illustration represents the historical 17-jewel execution, rather than merging it with the 2019 reissue.

Represented revision: Historical 17-jewel 321 (1958 GF 620-4 catalogue); not 2019 reissue

Recorded specifications

Base
Lemania 2310
Components
≈ 282
Jewels
17
Frequency
18,000 vph (2.5 Hz)
Power reserve
≈ 44 hours
Diameter
27.0 mm
Height
6.74 mm (historical 1958 catalogue)
Winding
Manual
Control
Column wheel
Clutch
Lateral (horizontal)
Balance
Regulator index, Nivarox hairspring

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library