Rolex Calibre 3155
The Day-Date, before the 3255
Rolex · From 1988; discontinued Day-Date 36 generation
Overview
A 31xx Day-Date movement with separate rapid crown correction of the day and date. The factory guide distinguishes its calendar finger, corrector, spring and taller minute/display parts from 3135. Adding a day disc alone does not reproduce this mechanism; the additional functions are grouped here.
Represented revision: 3155 Day-Date execution in the original 31xx factory technical information
Recorded specifications
- Jewels
- 31
- Frequency
- 28,800 vph (4 Hz)
- Power reserve
- ≈ 48 hours
- Diameter
- 29.30 mm
- Case-fitting diameter
- 28.10 mm
- Height
- 6.45 mm
- Calendar
- Day and date, double quickset
- Balance
- Free-sprung, Microstella nuts
- Hairspring
- Nivarox, Breguet overcoil
- Shock protection
- KIF
Models and relatives
- Rolex Day-Date 18238 and118238 families; exact case/reference must be checked
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Rolex 3135/3155 technical information (reproduced original)
Scope: Printed pp. 20–25:29.30 mm overall/28.10 mm casing,6.45 mm height, stop seconds, separate day/date correction, calendar components; pp. 15–16 clip-retained automatic module.
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.