Rolex Calibre 3135
The workhorse
Rolex · From 1988; discontinued generation
Overview
A date-equipped automatic from the 31xx family. The factory guide specifies a height-adjustable traversing balance bridge, four Microstella timing nuts and stop seconds. Its instantaneous calendar includes a cam, jewelled yoke and separate correction wheels, shown here as functional groups. A free-sprung balance still needs regulation and checks; it does not guarantee that the rate remains unchanged after servicing or shock.
Represented revision: 3135 date execution; original 31xx factory technical guide, spring alloy not fixed by it
Recorded specifications
- Jewels
- 31
- Frequency
- 28,800 vph (4 Hz)
- Power reserve
- ≈ 48 hours
- Diameter
- 28.5 mm
- Case-fitting diameter
- 28.10 mm
- Height
- 6.0 mm
- Balance
- Free-sprung, Microstella nuts
- Hairspring
- Breguet overcoil; alloy depends on production/service revision
- Shock protection
- KIF
Models and relatives
- Submariner Date 16610 / 116610
- Sea-Dweller 16600
- Datejust 16200 / 116200
- Yacht-Master 16622
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Rolex 3135/3155 technical information (reproduced original)
Scope: Printed pp. 5–19: dimensions, stop device, clip-retained rotor, minute pinion, calendar cam/yoke and correction work. Geometry remains schematic.
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.