ETA 2892-A2
The thin one everyone builds on
ETA · 1983 – present
Overview
The 2824's finer, flatter sibling, and the standard base for anything with a module bolted on top. At 3.6 mm it is a full millimetre thinner, which is why chronograph modules, GMT modules and full calendars are so often built on it rather than on the 2824. Fewer jewels than the 2824 — twenty-one against twenty-five — which surprises people who assume more is better; the 2892 simply needs fewer, because its automatic work is arranged differently.
Represented revision: 2892A2 execution in the reproduced ETA technical communication
Recorded specifications
- Jewels
- 21
- Frequency
- 28,800 vph (4 Hz)
- Power reserve
- ≈ 42 hours
- Diameter
- 25.6 mm (11½ ligne)
- Height
- 3.60 mm
- Winding
- Bidirectional, ball-bearing rotor
- Hacking
- Yes
- Common use
- Base for chronograph and calendar modules
Models and relatives
- Omega Seamaster (as cal. 1120)
- Breitling (as cal. 17 family)
- IWC (as cal. 30110)
- Cartier, Chopard, Bell & Ross
- base for many Dubois Dépraz chronograph modules
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- ETA 2892A2 technical communication
Scope: Guide cover: 25.60 mm, 3.60 mm, 42 h, 21 jewels and 28,800 A/h
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.