Calibre

Venus 175

The ancestor of the affordable column wheel

Venus · 1942 – 1966

Open the interactive schematic

Overview

A manual chronograph controlled by a seven-column pillar wheel and a lateral coupling clutch. The original base-175 sheet lists both 30-minute and 45-minute recorder runners with matching sliding gears; this illustration represents the 30-minute execution. The ST1901 appears separately in this collection: historical descent does not establish identical parts, continuous production or interchangeability.

Represented revision: Venus 175 two-register, 30-minute execution; original base-175 parts sheet visually inspected

Recorded specifications

Jewels
17
Frequency
18,000 vph (2.5 Hz)
Power reserve
≈ 45 hours
Diameter
31.00 mm
Winding
Manual
Control
Column wheel
Clutch
Lateral (horizontal)
Counters
30-minute recorder represented; original sheet also lists 45-minute alternatives
Descendant
Seagull ST19, still in production

Models and relatives

Facts and references

These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.

About the illustration

The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.

Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.

Compare this calibre in the library