F.P. Journe Chronomètre à Résonance
Two balances, listening to each other
F.P. Journe · 2019 RT analog 24-hour edition
Overview
This illustration follows the 2019 RT Chronomètre à Résonance with calibre 1499.3: an analog 24-hour display on the left and a 12-hour display on the right, two small seconds and a power-reserve indicator. Two free-sprung oscillators and independent going trains share a winding/setting crown; a separate button at four resets both seconds. The earlier RT digital left display and the later calibre 1520 are separate executions. The diagrams group their functional relationships; adjustment and operating conditions determine resonance behaviour.
Represented revision: 1499.3 in2019 analog24-hour/12-hour Chronometre a Resonance RT
Recorded specifications
- Display
- 24-hour analog left dial, 12-hour analog right dial, two small seconds and power reserve
- Height
- 4.50 mm (selected 2019 archive specification)
- Jewels
- 36
- Frequency
- 21,600 vph (3 Hz), both balances
- Power reserve
- ≈ 40 hours, displayed
- Diameter
- 32.60 mm
- Winding
- Manual
- Principle
- Two oscillators locking into resonance
- Plates
- 18-carat rose gold
- Lock time
- Depends on adjustment and operating conditions
Models and relatives
- F.P. Journe Chronomètre à Résonance RT, 2019 analog 24-hour edition
- Earlier RT digital and later 1520 executions are distinct
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- F.P. Journe 1499.3 user manual
Scope: Two independent trains, free-sprung balances, separate seconds-reset control and dimensions.
- F.P. Journe archived 2019 RT specification
Scope: 2019 analog 24-hour left / 12-hour right model; 32.60 mm diameter; 4.50 mm height; 36 jewels; 299 parts; 21,600 vph; two free-sprung balances; 40 ± 2 hours; separate seconds-reset control at 4; reserve indication at 11. The drawing remains schematic; other claims are not established by this reference.
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.