Omega 1040
The 1970s Speedmaster chronograph
Omega · 1971 – 1980
Overview
The Omega 1040 puts chronograph seconds and minutes at the centre. A separate twelve-hour recorder sits at six, while small running seconds and a 24-hour day/night disc share the register at nine. Its automatic winding includes a differential. The illustration groups these mechanisms by function; it does not reproduce every factory lever or service operation.
Represented revision: Calibre 1040; Omega technical guide, 1972
Recorded specifications
- Base
- Lemania 1341
- Jewels
- 22
- Frequency
- 28,800 vph (4 Hz)
- Power reserve
- 45 hours (factory guide)
- Diameter
- 31.00 mm (factory guide)
- Height
- 8.00 mm (factory guide)
- Winding
- Automatic, differential winding train
- Control
- Switching cam
- Registers
- Central chronograph seconds and minutes; separate 12-hour recorder; small seconds and 24-hour disc at 9
- Calendar
- Date
Models and relatives
- Omega Speedmaster Mark III, Mark IV, Seamaster chronographs
- base: Lemania 1341
- the 1045 that followed is a Lemania 5100
Facts and references
These sources support only the scope recorded beside each link. A source link does not establish that every specification or component has been verified.
- Omega 1040 factory technical guide (1972)
Scope: Display, differential winding, recorder groups and service sequence; drawing positions remain schematic
About the illustration
The interactive drawings are schematics, not factory technical drawings or service procedures. Positions, contacts and grouped assemblies are representative; a complete factory geometry and parts survey remains open.
Recorded specifications can depend on the production revision. Figures without scoped supporting evidence remain claims awaiting independent verification.